Ricoh Aficio 180 Copy Reference Manual Download

Page: 37 / 116

Copy Paper

❒

Before setting envelopes, make sure that they are rectangular in shape.
Refer to the following illustrations.

❒

Avoid using the non-supported envelopes listed on P.21

“Non-recommended

Paper”

Limitation

❒

Even if you use the reccommended types of envelope as notes above, copied
envelopes may come out wrinkled or smudged.

Non-recommended Paper

CAUTION:

Important

❒

Do not use paper with any kind of coating such as:
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper

❒

Otherwise, a fault might occur.

❒

Do not use copy paper that has been already copied on. Otherwise, a fault
might occur.

Metric version

Inch version

Good construction for envelopes

Poor construction for envelopes

Good construction for envelopes

Poor construction for envelopes

•

Do not reuse stapled paper. Do not use aluminum foil, carbon-
containing paper or other conductive paper. Otherwise, a fire
might occur.

TS3X020E

TS3X010E

Summary of Contents for Aficio 180





















































































































Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands

Ricoh Aficio 180, Copy Reference Manual

Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands