Ricoh Aficio 180 Copy Reference Manual Download

Page: 82 / 116

What to do If Something Goes Wrong

Loading Paper

Note

❒

If you want to change the paper
size, see

⇒

P.72

“Changing the Pa-

per Size”

Reference

Regarding paper types and sizes
that can be set, see

⇒

P.17

“Copy

Paper”

Pull out the paper tray until it
stops.

Loading paper in the paper tray
(Tray 1)

Note

❒

The bottom plate lower auto-
matically, if not, lower it.

❒

When the bottom plate is up,
the paper tray cannot reset.

Make sure the bottom plate is
down.

Square the paper and set it in
the tray.

Loading paper in the paper tray
unit (Tray 2, 3)

Square the paper and set it in
the tray.

Important

❒

Do not stack paper over the
limit mark.

Note

❒

Shuffle the paper before set-
ting it in the tray.

Push the paper tray in until it
stops.

Summary of Contents for Aficio 180





















































































































Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands

Ricoh Aficio 180, Copy Reference Manual

Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands