Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum ver-
satility from this machine all operators should carefully read and follow the instructions in this manual. Please keep
this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related to USER
SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes:
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Operator Safety:
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two GaAIAs laser
diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect reflected ) eye contact with
the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been de-
signed to prevent any possible laser beam exposure to the operator.
The following label is attached on the right side of the machine.
Laser Safety:
The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser
subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the
field. Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service
depot when replacement of the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual might result
in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before
reading this manual. (For details,
•
Type1: 4353MF
•
Type2: 4452MF
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality,Infotec recommends that you use genuine Infotec toner.
Infotec shall not be responsible for any damage or expense that might result from the use of parts other than genuine
Infotec parts in your Infotec office product.
Power Source
220 - 240V, 50/60Hz, 6.8A or more
Please be sure to connect the power cord to a power source as above. For details about power source, see “Power
Connection” of the “Copy Reference”.
This information is based on our present state of knowledge and is intended to provide general notes on our prod-
ucts and their uses.
It should not therefore be construed as guaranteeing specific properties of the products described or their suitability
for particular applications.
Any existing industrial property rights must be observed. The quality of our products is guaranteed under our Gen-
eral Conditions of Sale.
Read this manual carefully before you use this product and keep it handy for future reference.
For safety, please follow the instructions in this manual.