manualshive.com logo in svg

Ricoh Aficio 1035 Series, Operating Instructions Manual, Page: 56 / 84

Share
Download
Ricoh Aficio 1035 Series Operating Instructions Manual Download Page 56

User Tools (System Settings)

38

3

Paper Type Settings 

3

/

3

❖

❖

❖

❖

Paper Type (LCT)

Sets the display so you can see what type of paper is loaded in the large ca-
pacity tray.

Note

❒

Default
• Paper Type: : No display
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: Yes

❒

A key mark is displayed next to the paper tray if No is selected.

Limitation

❒

Auto paper select is only selected for the Copy function if No display and
Recycled paper are selected. However, auto paper select is not used if No
is selected.

❖

❖

❖

❖

Cover Sheet Tray (Copy/Document Server)

Note

❒

Default:
• Tray to program: NONE
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: At Mode selected

❒

The functions is that use the Cover Sheet Tray setting are the front cover
function and both covers function.

❒

When Mode Selected is selected, the cover settings options are only dis-
played when the cover function or slip sheet function is selected.

❒

You can only set the Copying Method in Duplex setting when At Mode se-
lected is selected.

❖

❖

❖

❖

Slip Sheet Tray (Copy/Document Server)

Note

❒

Default: 
• Tray to program: NONE
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: At Mode selected

❒

When you use the Slip Sheet function, you can use the output tray speci-
fied in the Slip Sheet Tray setting.

❒

When At Mode selected is selected, the options are only displayed when
the cover function or slip sheet function is selected.

Reference

Copy Reference "Cover/Slip Sheet"

Summary of Contents for Aficio 1035 Series





















































































Reviews:

No comments