manualshive.com logo in svg

Ricoh Aficio 1035 Series, Operating Instructions Manual, Page: 43 / 84

Share
Download
Ricoh Aficio 1035 Series Operating Instructions Manual Download Page 43

Configuring the Network with the Operation Panel

25

2

Note

❒

Press 

[

←

←

←

←

]

 

[

→

→

→

→

]

 Keys, and then pointer moves to the next entry field au-

tomatically.

❒

If you enter wrong IP address, press 

[Clear]

 and re-enter the IP address.

D

Press 

[OK]

.

G

If you want to set for following TCP/IP protocol 

[Sub-net Mask]

, 

[Gateway Ad-

dress]

, 

[Access Control]

, 

[Access Mask]

, refer to step six.

H

If you use DHCP server, press 

[Network Boot]

.

Note

❒

You need to change the settings when you use DHCP.

❒

Use default IP address.

A

Press 

[Network]

B

Press 

[Network Boot]

C

Press 

[DHCP]

, and then press 

[OK]

.

I

Press 

[NW Frame Type]

 if you use NetWare.

You can select following frame type:
• Auto select (Default)
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP

Note

❒

Select File server which connection must be same as the frame type.

Summary of Contents for Aficio 1035 Series





















































































Reviews:

No comments