manualshive.com logo in svg

Ricoh Aficio 1035 Series, Operating Instructions Manual, Page: 13 / 84

Share
Download
Ricoh Aficio 1035 Series Operating Instructions Manual Download Page 13

iii

• This product includes software developed by Theo de Raadt.
• This product includes software developed by Jonathan Stone and Jason R.

Thorpe for the NetBSD Project.

• This product includes software developed by the University of California,

Lawrence Berkeley Laboratory and its contributors.

• This product includes software developed by Christos Zoulas.
• This product includes software developed by Christopher G. Demetriou for

the NetBSD Project.

• This product includes software developed by Paul Kranenburg.
• This product includes software developed by Adam Glass.
• This product includes software developed by Jonathan Stone.
• This product includes software developed by Jonathan Stone for the NetBSD

Project.

• This product includes software developed by Winning Strategies, Inc.
• This product includes software developed by Frank van der Linden for the

NetBSD Project.

• This product includes software developed for the NetBSD Project by Frank

van der Linden

• This product includes software developed for the NetBSD Project by Frank

van der Linden

• This product includes software developed for the NetBSD Project by Jason R.

Thorpe.

• The software was developed by the University of California, Berkeley.
• This product includes software developed by Chris Provenzano, the Univer-

sity of California, Berkeley, and contributors

Summary of Contents for Aficio 1035 Series





















































































Reviews:

No comments