manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 74

Transmission

66

1

Searching for a Destination in the Address 
Book

Use this function to search for a destination registered in the destination list or
on the LDAP server.

Important

❒

To search for a destination from an LDAP server, the LDAP server must be
registered in advance. For details about registering LDAP servers, see “Sys-
tem Settings”, General Settings Guide.

Note

❒

The search returns destinations that partially match the entered name.

❒

A warning message appears if the search returns more than the maximum
number of destinations you can search for at a time. Press 

[

Exit

]

 and change

the destination name to view fewer destinations.

❒

Although one user can program multiple e-mail addresses, only one address
can be retrieved by the search. The address retrieved by the search depends
on the searching method supported by the LDAP server. However, the ad-
dress programmed first is normally retrieved.

Reference

p.182 “Maximum Values”
“System Settings”, General Settings Guide

Search by Name

Follow these steps to search for a destination registered in the Address Book by
name.

Important

❒

If 

[

LDAP Search

]

 is set to 

[

Off

]

 in Administrator Tools, in the System Settings

menu, the display for selecting either 

[

Search Address Book

]

 or 

[

Search LDAP

]

does not appear.

A

Press 

[

]

 to switch the destination to fax number, e-mail address, or

IP-Fax destination.

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands