manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 36

Transmission

28

1

• Internet Fax delivery might be delayed due to network congestion. Use Inter-

net Fax transmission that bypasses the SMTP server, a public telephone line
fax, or IP-Fax whenever communication time is a concern.

• If a power outage lasts about twelve hours, or the machine is disconnected

from the power outlet for about twelve hours, documents stored in the fax
machine's memory are deleted. If any document is deleted, the Power Failure
Report is automatically printed out when the main power switch is turned on.
Use this report to check which documents were deleted. Simply turning off
the power by pressing the Operation switch does not delete stored documents.
See “Troubleshooting When Using the Facsimile Function”, Troubleshooting.

• You may not be able to send large files as e-mail, depending on e-mail envi-

ronment conditions.

• When available memory is low, you may not be able to send Internet Fax documents.
• Because the machine sends documents as e-mail messages with an attached

TIFF-F image, viewer applications are required in order to view documents
when they are received on a computer.

• With a large volume of document, it may take some time before transmission

starts. This is due to the time the machine requires to convert the data in memory.

Reference

p.30 “T.37 Full Mode”
p.34 “Paper Size and Scanned Area”
p.54 “Bypassing the SMTP server”
“Troubleshooting When Using the Facsimile Function”, Troubleshooting

Functions Not Available for E-mail Transmission

The following functions are supported with standard fax transmission, but not
with Internet Faxing.
• Immediate Transmission 
• Transmission by SUB Code
• On  Hook  Dial
• Manual Dial
• JBIG  Transmission
• ECM (Error Correction Mode)

Functions Not Available for E-mail Reception

The following functions are supported with standard fax reception, but not with
Internet Faxing.
• Memory Lock Reception
• SEP Code reception
• Authorized  Reception

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands