manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 48

Transmission

40

1

Detecting Blank Sheet

Upon completion of the first page scanning, an alarm sounds if the page is nearly
blank.

Important

❒

The blank sheet-detecting function works only when an original is scanned
using the ADF or ARDF.

❒

The blank sheet-detecting function is ineffective for second and subsequent
pages.

This function notifies you if an original is placed wrong side down on the scan-
ner. When this happens, a message appears for a few seconds. The message dif-
fers depending on number of pages to be scanned and transmission mode.
• When sending a document using Immediate Transmission or when all pages

have been scanned in Memory Transmission:

• When some pages are left unscanned in Parallel Memory Transmission or

Memory Transmission:

Note

❒

Even if a near blank sheet is detected, it is transmitted as normal.

❒

You can turn this function on or off with the User Parameter (switch 11, bit 2).

❒

To cancel scanning if a blank sheet is detected, press the 

{

Cancel/Stop

}

 key.

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands