manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 137

Printing Options

129

3

Center Mark

When this function is enabled, marks are printed halfway down the left side and
at the top center of each page received.
This makes it easy for you to position a hole puncher correctly when you file re-
ceived documents.

Note

❒

You can enable or disable this function using Center Mark in the Fax Features
menu.

❒

The Center Mark may deviate a little from the exact center of the edge.

Reference

“Fax Features”, General Settings Guide

Reception Time

You can have the date, time, and file number printed at the bottom of the docu-
ment when it is received.

Note

❒

You can turn this function on or off using Print Reception Time in the Fax Fea-
tures menu.

❒

When a received document is printed on two or more sheets, the reception
time is printed on the last page.

❒

The time when the document was printed can also be recorded on the docu-
ment. If you need this function, contact your service representative.

Reference

“Fax Features”, General Settings Guide

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands