E-mail Options
99
2
D
Select
[
Return Receipt
]
using
{U}
or
{T}
, and then press the
{
OK
}
key.
E
Select
[
On
]
or
[
Off
]
using
{U}
or
{T}
, and then press the
{
OK
}
key.
The screen returns to that of step
F
Press the
{
Escape
}
key twice.
The standby screen returns.
To check the settings, press
[
TX Mode
]
.
G
Specify a destination, and then press the
{
Start
}
key.
Note
❒
If the fax is not received normally, “Error” appears in the Result column.
❒
Only the last 50 communications appear in the Journal. If you do not re-
ceive a reception notice message before the last 50 communications are fin-
ished, “OK” might not be printed in the Journal's Result column. This may
happen even if the mail is received normally at the other end.
❒
If you specify mailing list addresses, do not set for Reception Notice. Oth-
erwise, you will receive multiple reception notice messages from e-mail re-
cipients, and the Result column will be overwritten each time a new notice
message is received. However, if you receive a reception notice message
indicating an error, “Error” appears in the Result column and will not be
overwritten, even if you subsequently receive a reception notice message
as “OK” following the error message.
❒
Reception notice results are only shown in the Journal. The Result column
in all other files, lists, and transmission reports show “- -”.
❒
Reception notice messages themselves are not recorded in the Journal.
❒
You can select whether or not to print the Reception Notice. This can be set
with User Parameters (switch 21, bit 0) in the Fax Features menu.
❒
You cannot broadcast e-mail using Reception Notice. The documents are
sent to the destinations in the order in which they were specified.
Reference
“Fax Features”, General Settings Guide
