manualshive.com logo in svg

Ricoh A095, Service Manual

Share
Download
Ricoh A095 Service Manual Download Page 674

Tech Service Bulletin No. A095/A096/A097 – 004
Page 2 of 2

•

 

UPDATE 2:

REFERENCE

OLD PART NO.

NEW PART NO.

DESCRIPTION

QTY

INT

PAGE

ITEM

A0966181

A1766181

Front Side Plate-P/B

1

1

97

29 *

A0966110

A1766110

Harness Cover

1

1

97

27 *

* Denotes that these parts should be replaced as a set.

INTERCHANGEABILITY CHART:

0

OLD and NEW parts can be used in both OLD and
NEW machines.

2

NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.

1

NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.

3

OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.

3/S

Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
previously modified, use the new part numbers individually.

FRONT COVER PLATE & HARNESS COVER – The shape of the Paper
Bank Harness Cover and the Paper Bank Front Side Plate have been
changed.  Due to the modification of these parts, the old style parts will no
longer be supplied, therefore replace these parts as a set.

27 Paper Bank Harness Cover

Old

New

29 Paper Bank Front Side Plate Ass’y

Summary of Contents for A095









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands