l
Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l
There may be coating cracks at some joints and each product may experience different coloration of the wood grain as frames are made of natural wood.
l
If you find something wrong with this product, please let us know. Thank you!
UPC/JAN
Material
803840 94902-3 / 4973655 98790-2
4
Dimension
Door: Birch (Laquer finish) ; Frame: Steel (Polyester coating) ; Handle: ABS resin
Lock: Nylon ; Knob gasket
:
Polypropylene ; Adjuster: ABS resin, Elastomer
For USA Customers
30 - 35.8"W x 2"D x 30.7"H
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at
www.richellusa.com
MADE IN CHINA
Cautions!
Cautions!
l
When opening/closing the Door, make sure the area is
clear and be careful not to pinch your hands, fingers,
or pets as shown in Figure 8.
7. Installation Check / How to Open and Close the Door
8. How to Disassemble
9. How to Clean
10. Specifications
When correctly installed, the gate should not feel loose or wobbly
when tugged.
After the Door is closed, make sure the Top/Bottom Locks work correctly.
①
Press the lock button (upper and lower one) to unlock
the upper lock.
②
Press and open the door.
The Bottom Lock is designed to lock the door even if the dog tries to
push the door while the Top Lock is not firmly locked. Make sure to
press the Bottom Lock and lock properly to avoid dog opening the door.
※
For the Bottom Lock
᰻
Twist the Bottom Lock on the side of the dogs. Pay attention not to force
the door open when the button lock is on.
Rotate Adjuster Knobs in the opposite direction to loosen and remove.
l
Be careful not to drop the product during disassembly.
l
Make sure the Door is locked during disassembly.
Figure 7
Lock button (upper)
Top lock
Bottom Lock
Lock button (lower)
Turn down the Bottom
Lock on the side of the
dogs.
l
Use a mild detergent and water and clean with a soft cloth/sponge. Cleaning with a scrub brush and/or using a polishing
powder may cause scratches, rust and/or discolor this product.
l
When using creosol or other disinfectants, make sure to dilute them, otherwise damage to the product or discoloration may occur.
l
Do not use harsh chemicals such as thinner, benzene or alcohol. These may cause damage/discoloration to the wooden finish.
l
After cleaning, wipe dry with soft cloth or place in shaded area to air dry; do not place product in direct sunlight. This may
cause discoloration, deformation, or rust.
Figure 8
