北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
22
Manu Type:
①
Tradition (traditional Manual motion),
②
Point movement (Manual motion
of pointing).
7) Array Param:
XDirCnt: The array number along X axis
YDirCnt: The array number along Y axis.
Interval: System defaults 0, it means not wait.
X Space: The space along X axis (Unit: mm).
Y Space: The space along Y axis (Unit: mm).
Total Processing times= X count * Y count. The interval defaults to 0, it means no
waiting.
During processing, if user wants to change processing materials after completion of
each processing, needs to set time interval as a negative number.
When the first time processing is completed, the screen prompt “Waiting for the next
array
processing…”, at this moment, user should press any key to start the next array
processing, if user doesn‟t press any key, the system will keep waiting.
Starting array work, press“
”, the system prompts advanced processing list,
then choose Array Work from the list.
8) 2D Shape Confi :
To set the parameters of two-dimensional graphics when processing DXF and PLT
files.
Trvl Hgt: The travel height when run a 2D file, default 40mm.
Wrk Dpth: The cutting depth of a 2D file which is calculated from the surface of the
material, default 0mm.
Lift Spd: The tool lift speed when running a 2D file, default 3000mm/min.
Fall Spd: The tool fall speed when running a 2D file, default 3000mm/min.
9) G Code Attrib:
Set special codes reading attribute in the G code file, to make changes according to
the actual needs.
