北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
39
work coordinate system; press “
” + “Number button 1-9” can switch among
different work coordinate systems.
Schematic diagram of coordinate system
Note
: The system cannot set workpiece origin under machine coordinate system. User
should switch to work coordinate first, and then set workpiece origin.
5.4
Auto processing operation
Auto processing refers to the system runs according to the instruction of the file in U
disk or inner storage space, it also called “file processing”. Before auto processing, user
must set the machine tool parameters and all of the system parameters correctly.
Auto processing steps could refer to the following text.
5.4.1
Set workpiece origin
The origin coordinates of X, Y and Z axis in the processing program is workpiece
origin. Before processing, we should pay attention to this position as well as
the real position. Operation is as follow:
Move X, Y and Z to the position which will start to process the file on workpiece.
Afterwards, press zero clearing “
” can set the workpiece origin of X, Y axis. Press
zero clearing “
” can set the origin of Z axis. It should be noted that if user have
already used the automatically tool setting function which single key is “
” will no
