北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
18
Please refer to the wiring manual for detailed cylinder wiring instructions.
The machine and the control system are connected with each other when the above
wirings are completed.
3.4
Commissioning of the machine and control system
1) Turn on the power, manually move each axis and confirm the motion direction. If the
movement direction is opposite, user can change the motor phase sequence (A+,A-
or B+,B-) or revise servo parameters (Refer to the servo driver user
‟s manual).
2) According to the original location of the machine coordinates, user can enter into
Menu-Machine Setup-Home Setup- Home Dir
to reset it.
3)
Press “
”-Voltage Level (the top row stand for input voltage) to check whether
the HOME switch is working normally or not (manually trigger the voltage level
changes from L to H).
The machine is in good connection if all of the above work normal.
4
Menu Description
4.1
Menu category
RichAuto-F135
motion control system divides its menu according to menu function:
Five user interface, include: User Setup, File Operate, Machine Setup, System Setup,
Version View.
1) User Setup: This menu is used to set processing parameters, G code attributes
etc.
2) File Operate: Copy file from U disk to inner storage space and delete inner file.
3) Machine Setup: To set relative parameters about machine hardware.
4) System Setup: Change Chinese or English language, backup parameters and
restore factory setting.
5) Version View: Users can view information about the system hardware and
software etc.
