RichAuto AutoNow F1 Series User Manual Download Page 47

Page: 47 / 67

北京锐志天宏科技股份有限公司

Beijing RichAuto S&T Co., Ltd.

Forging ahead, create future together!

The system asks the user whether save the modified position. Press “

”/

“

” the system will start processing in modified position, press “

”, system

will go back to the previous position where before modifying.

5.6

Find Breakpoint Processing & Power Failure

Protection

Find Breakpoint processing is a function developed to meet the special requirements

of customers in operation. Find Breakpoint processing mainly includes: Find Breakpoint,

Break List, Part Work, PwrFlrProtect. Press "

" to start advanced processing,

screen shown as below:

5.6.1

Find Breakpoint

If the tool broken unexpected in the process and no breakpoint is saved,

stop processing and replace with a new tool. If the original workpiece was not

destroyed, manually move X and Y to the position in front of the breaking place,

pre

ss “

” to start advanced processing, then press”

”to move cursor to

Find Breakpoint,

Break Work

Find Breakpoint

Break List

Part Work

PwrFlrProtect

Save Adjustment?

Save

Cancel

Summary of Contents for AutoNow F1 Series




































































Search results

Summary of Contents for AutoNow F1 Series

Reviews:

Related manuals for AutoNow F1 Series

Brands by name

Popular brands

RichAuto AutoNow F1 Series, User Manual

Search results

Summary of Contents for AutoNow F1 Series

Reviews:

Related manuals for AutoNow F1 Series

Brands by name

Popular brands