RichAuto A51 User Manual Download Page 74

Page: 74 / 77

Beijing RuiZhitianhong technology Co.Ltd.

ADD.

：

A308 jiahua building,

9 Shangdi 3rd Street, Haidian District, Beijing.

P.C.

：

100085.

Dell

：

+86-10-62970368/82923063 Fax

：

+86-10-82920078 URL

：

www.richnc.com.cn

calculate the processing time

：：

After calculating

，

the screen will display file processing time(different work

speed will show different processing time)

Find break no.

：

During processing, if accidentally tool damaged and user hasn’t saved the break

point, stop working and replace tool. After that, user can manually move X, Y axis to

the nearest point where the cutter was broken (recommend to move a little further),

press

“

”

“

”

to start advanced work, move cursor to “Find break no.”,

then press

“

”

to enter, system will prompt

：

Press

“

”

to start working.

Auto resize

：

Summary of Contents for A51














































































Search results

Summary of Contents for A51

Reviews:

Related manuals for A51

Brands by name

Popular brands

RichAuto A51, User Manual

Search results

Summary of Contents for A51

Reviews:

Related manuals for A51

Brands by name

Popular brands