Beijing RuiZhitianhong technology Co.Ltd.
ADD.
：
A308 jiahua building,
9 Shangdi 3rd Street, Haidian District, Beijing.
P.C.
：
100085.
Dell
：
+86-10-62970368/82923063 Fax
：
+86-10-82920078 URL
：
www.richnc.com.cn
53
Input the required value, then press
“
”
to save it, or press
“
”
to quit.
In order to ensure the accuracy of processing and debugging, the system
introduces the concept of “grid” which also called “minimum feed”. It range is
0.05mm-1.0mm.When user change mode to “step”, push each axis button, machine
will move by grid distance.
High speed manual mode setting is the same as low speed manual mode.
5.3.2 Manual motion mode
In order to meet different situation of manual movement, the system provide 3
kinds of motion modes: Continuous, step, distance. We can change mode by pressing
“
”, and machine status area will display the current manual motion mode.
1) Continuous motion mode
In this mode, it has no value control. Machine move after user pressing motion
direction key
（
、
、
、
、
、
）
Its motion speed
is decided by current speed mode.
2) Step motion mode
This mode is always move in low speed, move 1 grid per 0.5 second. The grid
distance is decided by current speed mode. This motion mode is suitable for tool
adjusting or precise adjustment of the location of the mechanical coordinates.
3) Distance motion mode
In this mode, it runs according to the setting of distance. Machine will move by
the set distance when user press direction button
（
、
、
、
、
