Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
returning home, and the screen displays as follow
Manual control state initial interface
5.3.1
Manual operation speed switching and adjusting
1) Speed mode switching
There are two speed modes: high speed
pressing “
”. The speed mode you choose will decide the
speed.
2) Speed adjusting:
Under the manual operation mode, pressing “
the current speed mode is “L”, the dsp controller displays as follow:
Press“
”or “
“
”button to modify the value, press “
input a wrong number, press “
In order to ensure the accuracy of processing and debugging, the system introduces
concept of grid which also called minimum feed. It range is 0.05mm
change mode into “step”, pressing 3
the grid distance which user has set
About the high speed manual mode setting method is exactly the same as introduced
above.
Coordinate
Motion axis
Manual mode status
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
reen displays as follow:
Manual control state initial interface
：
Manual operation speed switching and adjusting
1) Speed mode switching
There are two speed modes: high speed(F) and low speed(L). Change the speed mode by
”. The speed mode you choose will decide the manual processing
Under the manual operation mode, pressing “
” to adjust current speed settings. If
the current speed mode is “L”, the dsp controller displays as follow:
”to move the cursor, then select the option and press
”button to modify the value, press “
” to save, press “
input a wrong number, press “
” to delete the last numbers and re-input new value.
In order to ensure the accuracy of processing and debugging, the system introduces
concept of grid which also called minimum feed. It range is 0.05mm-1.0mm.When user
pressing 3-axis direstion buttons, the machine will
which user has set.
About the high speed manual mode setting method is exactly the same as introduced
WX
0.000 MAUN
WY
0.000 F2
WZ
0.000 L SP
Continue
Motion axis
Operation status
Spindle status
Speed mode
Manual Param
XSLOW
1200.000
YSLOW
1200.000
ZSLOW
1200.000
Slow Grid
0.100
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn
36
. Change the speed mode by
processing
” to adjust current speed settings. If
”to move the cursor, then select the option and press
” to quit. If
input new value.
In order to ensure the accuracy of processing and debugging, the system introduces a
1.0mm.When user
ine will be moving at
About the high speed manual mode setting method is exactly the same as introduced
Operation status
Spindle status
Speed mode
