Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
The start position of X, Y and Z in the processing program is the workpiece origin. Before
operation, we should pay attention to this position as well as the real position. Operation is
as follow:
Manual move X,Y and Z to the position which will start to process the file on workpiece.
Afterwards, press zero clearing “
clearing “
” to decide the origin of Z axis.
5.4.2 Set stop position
Press“
”/“
”to move the
press “
” to move Y axis to a proper position too
keys “
+
” to set the current
save the setting.
5.4.3 Adjust the origin of the workpiece
If the user needs to reset workpiece origin, for example: needs to move Y direction or
adjust the cutters depth of X and Z axis. In this case, the user can
, the lathe machine
axis will move to the settled origin
over the settled workpiece original point at the sa
button to change the manual mode into DISTANCE, input the value 10, and then press
button to save the distance as 10mm. At that time,
“
”and“
”, to make
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
The start position of X, Y and Z in the processing program is the workpiece origin. Before
attention to this position as well as the real position. Operation is
Manual move X,Y and Z to the position which will start to process the file on workpiece.
Afterwards, press zero clearing “
” to decide the origin of X,Y axis. Press zero
” to decide the origin of Z axis.
5.4.2 Set stop position
”to move the two cutters to reasonable and safety position,
to move Y axis to a proper position too
，
and then press the combination
” to set the current location as stop position, press “
Adjust the origin of the workpiece
If the user needs to reset workpiece origin, for example: needs to move Y direction or
adjust the cutters depth of X and Z axis. In this case, the user can operate as follow. Press
e machine will complete the moving of returning to workpiece origin, Y
axis will move to the settled original position, and cutters of X and Y axis will stop 10mm
over the settled workpiece original point at the same time. Next, double press
button to change the manual mode into DISTANCE, input the value 10, and then press
button to save the distance as 10mm. At that time,
to make the X and Y cutters moving back to the settled position of
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn
39
The start position of X, Y and Z in the processing program is the workpiece origin. Before
attention to this position as well as the real position. Operation is
Manual move X,Y and Z to the position which will start to process the file on workpiece.
” to decide the origin of X,Y axis. Press zero
two cutters to reasonable and safety position, then
and then press the combination
press “
” to
If the user needs to reset workpiece origin, for example: needs to move Y direction or
operate as follow. Press
will complete the moving of returning to workpiece origin, Y
cutters of X and Y axis will stop 10mm
press the
button to change the manual mode into DISTANCE, input the value 10, and then press
button to save the distance as 10mm. At that time, single press
back to the settled position of