Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
workpiece origin. Then double press
speed mode”) , fine adjust X and Z
“
”and“
” to save the adjustment
origin.
5.4.4 Choose processing files
Since the workpiece origin has been set. Now user can press
prompt dialog shown on the screen:
Press “
” and “
press “
”to enter into the
screen, choose the file by pressing “
“
”and“
”to skip two rows and
to exit.
5.4.5
Set processing parameters
After choosing the processing file please press“
menu, it includes work speed
length, speed scale, fall down speed(
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
. Then double press
button to change it into STEP mode(at “Low
speed mode”) , fine adjust X and Z axes to new workpiece origin position then
to save the adjustment. That’s all the steps of adjusting workpiece
Choose processing files
Since the workpiece origin has been set. Now user can press
prompt dialog shown on the screen:
”to move the cursor and select through the displaying list,
”to enter into the file list, the screen will display three file name
, choose the file by pressing “
”and“
” to move one by one
skip two rows and turn to the next page. Press “
Set processing parameters
After choosing the processing file please press“
”,enter into “Set work
, it includes work speed
、
travel speed
（
or Fast speed
）
、
last speed
、
fall down speed(refer to picture below).
SelectWorkFile
Internal File
Recent File
UDisk File
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn
40
button to change it into STEP mode(at “Low
to new workpiece origin position then press
. That’s all the steps of adjusting workpiece
and see the
”to move the cursor and select through the displaying list,
list, the screen will display three file name in every
to move one by one. Press
” button
“Set work parameters”
RoughLen, Left
