RichAuto A122, User Manual

Page: 24 / 55

Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
Indicate paste wood strips length. According to the actual measured value, unit is mm.
Modify method : press“
finish the setting.
(6) PartCnt (part count)
The feed count of paste wood strips area, it is to say, divided into several times
the lathe working.
Note: the
(7) AtchThck(attached wood strip thickness)
Refers to the thickness of the wood strip
unit is mm.
Modify method : press“
finish the setting.
(8) OppoErr (opposite error
Factory setting, please do not change.
(9) Use fast(using fast speed)
Indicated choose whether
along vertical angle.
Modify method : press“
setting.
(10) LathGrnd (lathe grinding)
Factory setting, please do not change.
(11) Retract
Refers to the distance of cutters retract to the sides when set the work piece origin
after completed the tool setting. Unit is mm.
2. Feed list
(1) Feed cnt (feed count)
Indicated how many time to finish the work on the wood material. System defaults
value is 1 time.
Modify method : press“
finish the setting.
(2) FrstPcnt/LastPcnt
When set feed count is over 1 time, the user can decide the first time feed depth ratio
and the last time feed ratio.
Eg1
：
Divide into 2 times to
0.6, then the “LastPcnt” value should be set as 0.4 .
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
Indicate paste wood strips length. According to the actual measured value, unit is mm.
: press“ ”to input a specific value, and then press“
The feed count of paste wood strips area, it is to say, divided into several times
Note: the “PartCnt” must be a odd number (1,3,5,7,9….).
AtchThck(attached wood strip thickness)
Refers to the thickness of the wood strips. According to the actual measured value,
: press“ ”to input a specific value, and then press
opposite error)
please do not change.
Use fast(using fast speed)
hoose whether to execute the fast speed or not when the tool is retracting
: press“ ”to choose on/off, and then press“
LathGrnd (lathe grinding)
Factory setting, please do not change.
distance of cutters retract to the sides when set the work piece origin
after completed the tool setting. Unit is mm.
Feed cnt (feed count)
Indicated how many time to finish the work on the wood material. System defaults
: press“ ”to input a specific value, and then press“
/LastPcnt
When set feed count is over 1 time, the user can decide the first time feed depth ratio
and the last time feed ratio.
Divide into 2 times to complete the lathe processing
，
if the “FrstPcnt” value is
0.6, then the “LastPcnt” value should be set as 0.4 .
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn 20
Indicate paste wood strips length. According to the actual measured value, unit is mm.
”to input a specific value, and then press“ ”to
The feed count of paste wood strips area, it is to say, divided into several times to complete
cording to the actual measured value,
”to input a specific value, and then press“ ”to
the tool is retracting
”to finish the
distance of cutters retract to the sides when set the work piece origin
Indicated how many time to finish the work on the wood material. System defaults
”to input a specific value, and then press“ ”to
When set feed count is over 1 time, the user can decide the first time feed depth ratio
if the “FrstPcnt” value is