©
Rice Lake Weighing Systems
●
All Rights Reserved
19
Operation
For Net Addition
.
2. Add a specimen to be weighed.
3. Once
displays, press
.
SUM TOTAL
displays momentarily.
4. The weight is displayed, followed by an automatic tare. Repeat this procedure until all additions have been completed.
3.15.3 View/Delete Total Value
Press
, the total value displays.
Press
, t
he total value is deleted.
3.16 Tare-Subtraction Reminder Function
If the Tare-Subtraction Reminder is activated,
PUSH TARE
displays when a container is placed on the balance.
If the Zero-Point-Adjustment Reminder is activated at the same time, it has priority.
There are two modes in the Tare-Subtraction Reminder function:
•
T Reminder 1
indicates the weight display is over the zero-point-adjustment range
•
T Reminder 2
indicates the weight display is over the zero-point-adjustment range before tare subtraction, and the
net display is negative after tare subtraction
3.16.1 Set Tare-Subtraction Reminder Function
1. Press
.
displays.
2. Press
.
11 MODE
and the current operation mode displays.
3. Press
or
to scroll to
T REMINDER
.
4. Press
. The current setting begins to flash.
5. Press
or
to select desired setting.
6. Press
to save the setting.
7. Press
to return to operation display.
3.17 Zero-Point-Adjustment Reminder Function
If the Zero-Point-Adjustment Reminder is activated,
PUSH ZERO
is displayed if the load returns to within the zero point
adjustment range after the load was over the range.
Place the samples on the weighing pan. When the samples are removed,
PUSH ZERO
displays. Press
and 0.00
displays
3.17.1 Set Zero-Point-Adjustment Reminder Function
1. Press
.
displays.
2. Press
.
11 MODE
and the current operation mode displays.
3. Press
or
to scroll to
Z REMINDER
.
1 applICations
1 applICations
