10
Visit our website
TA Plus Balance
4. Press
. The current setting begins to flash.
5. Press
or
to select desired preset tare number (1-5).
6. Press
to save the setting.
7. Press
to return to operation display.
NET
displays in the upper right hand corner of the display.
To exit a preset tare:
1. Ensure there is no weight on the balance.
2. Press
.
ZERO
flashes and display returns to Weigh Mode.
NET
sis no longer displayed.
This not only exits a preset tare, it also sets the preset tare mode back to off; disabling presets.
3.7.2 Check Tare Weight Using an F-Key
If an F-key has been set to Tare, it can be used to see what the tare weight is.
1. Set an F-key to Tare.
2. With tare in place, press
until
TARE
is displayed above an F-key.
3. Press the
TARE
F-key. The tare weight displays.
4. Press
to return to operation mode.
3.7.3 Add to Product
To weigh additional products without the value of the existing product, use the following steps.
1. Place first product to be weighed on the balance.
2. Press
,
ZERO TARE
displays.
3. 0000000 displays after zero is complete.
4. Add additional products to the balance/container. The weight of additional product only is displayed.
Note
