Rice Lake Measurement Systems International MSI9750A, Operator'S Manual

Page: 24 / 95

Page 24 MSI-9750A RF Remote Indicator • User Guide
9750A
HANDHELD RF REMOTE INDICATOR for
C
ELL
S
CALE
®
DEFAULT FUNCTION KEYS
Add to Total
....................Default for F1. Add the current weight to the total, or Auto Total On/Off.
Channel
...........................Default for F2. When pressed, changes to the next channel in the Scan Index. Switch
between selected scale channels. If preceded by a number (1-32), the display will show
® ®
the chosen channel position from the Channel scan list. This always works, even if F2
is programmed for another function.
Send to CS
.....................Default for F3. Causes the Master CellScale to Output text strings to all connected
hosts.
Net Address
...................Default for F4. When pressed, switches to the next available Network Address. When
preceded by a number (0-31), will switch directly to the numbered network. This
always works, even if F4 is programmed for another function.
UNITS
...............................Default for F5. Changes current focus channel weight units (kg, lb, etc.).
ID Number
......................Default for F6. When pressed, switches to the next available ID Code defi ned for the
Zcurrent channel. When preceded by a number, will switch directly to the numbered
ID. This always works, even if F6 is programmed for another function.
1 – Standard Functions Group
Disabled
..........................no function assigned.
Default
.............................set the key as labeled in White for standard Function keys, or the Enter Function key
default as listed.
Disp Date and Time
......Turns the display into a clock with date. Toggles.
View Totals
.....................Shows current ID Totals and access to statistics.
§ Change Units
..............1 button access to switching weight units. Available units are defined by the
CellScale.
Display Set Points
........Observe current status of Set Points. Confi gure set points.
Clear Latched SP’s
.......Clears any latched Set Point. However, if the Set Point is still triggered this key will
not turn it off.
Toggle Peak Hold
.........Captures maximum readings. Toggles on and off.
2 – Channel, ID, and Address Group
Enter ID String 1
...........Allows direct entry of ID String 1 which can be used for any text entries.
Enter ID String 2
...........Allows direct entry of ID String 2 which can be used for any text entries.
§ New Prod ID
................Default for Enter-F6. Brings up text entry screen. When a name is entered, a new
Product ID is created in the connected CellScale (limited to 32 total IDs).
§ Show Last Channel
..Default for Enter-F2. Steps current active channel back one position in the scan list.
Show Last Prod ID
.......Steps current active Product ID back one position in the Product ID list.
§ Show Last Address
..Default for Enter-F4. Steps current active Network Address back one position in the
Network Scan list.
Clear ID & Bar Strings
Clears all ID and Bar Code Strings.
3 – Total, Statistics, and Tests Group
§ Clear Last Total
..........Default for Enter-F1. Clears just the last weight added to the total, and decrements the
weighments counter.
Show Statistics
.............Toggles the Statistics display on and off.
§ Show Grand Totals
...Default for Enter-F5. Toggles the Grand Total display on and off.
RF Site Testing
..............Used to setup CellScale networks and test for adequate range.
Display Test Chars
.......Tests the LCD. Displays all programmed fonts and symbols.
4 – Send RF and Printing Group
This group contains two sub-menus. Press [7] to toggle between sub-menus.
§ Print 9750A Comm 1
Default for Enter-F3. Outputs Comm 1 print string to the DE-9 connector.
Send All & Print
.............Tells the CellScale to output all of its print strings and outputs Comm 1 print string to
the DE-9 connector.
Send to CS Host 1
........Tells the CellScale to output all of its Host 1 output string (CellScale local Comm
Port)
Print & Send Host 1
.....Outputs Comm 1 print string to the DE-9 connector, and tells the CellScale to output
it’s Host1 print string.
Send to CS Host 3
........Tells the CellScale to output it’s Host3 print string.
Print & Send Host 3
.....Outputs Comm 1 print string to the DE-9 connector, and tells the CellScale to output
§
Default Enter Functions