Page 22 MSI-9750A RF Remote Indicator • User Guide
9750A
HANDHELD RF REMOTE INDICATOR for
C
ELL
S
CALE
UNITS
Allows easy weight units conversions. Up to 8 Units are available. See “SETUP UNITS” in the CellScale Manual
for details on activating the available units. Since Units are stored with each ID Code, the menu item for chang-
ing units is found in the “Product ID Codes” Menu. See section 3. Alternately, if changing Units is a common
operation, a Function key can be programmed for the task. For example, if
[F2]
is programmed for UNITS, then
change the current unit by pressing
[F2]
. Each subsequent available unit will be found with repeated presses of
the
[F2]
key.
PEAK HOLD (FUNCTION KEY OPTION)
Peak Hold is disallowed in Legal-for-trade systems.
Allows monitoring peak weight. Uses a special mode of the CellScale’s A/D converter for capturing transient
events.
To Capture Peak Weight Readings
1) Program a
FUNCTION
key for “Toggle Peak Hold” (See Section 4).
2) Turn on the Peak Hold mode by pressing the selected
FUNCTION
key. The display reads “PN” for Peak
Net readings, or “P” for Peak Gross to indicate peak hold mode is enabled. The display will only update
when a greater value than previously recorded is detected.
To Clear Peak Weight Readings
Turn off the Peak mode by pressing the
FUNCTION
key programmed as “Toggle Peak Hold”. The display
reverts to Gross or Net and clears the peak value from memory.
To Start the Display Test
1) Press the
POWER
key followed quickly
by the
ESC
key. The MSI-9750A “Watch
Network” screen will appear.
2) Press the
TARE
key. The display test will
start. Each test screen will last 2 seconds.
3) To freeze on any screen, press the
[3]
key. To
continue the display test, press
[3]
again.
4) To return to the weight mode display, press
Peak Hold captures data at a reading rate set up by the CellScale A/D parameters. For High Speed Peak Hold, use a faster A/D rate. See CellScale Manual.
SEND / PRINT
Sends the current displayed reading to the Comm Port, the Data Logging Memory, or to a remote RF Host. Any
or all weight, time, date, and scale parameter functions can be printed as set in the Print Setup Mode (Section 9).
The action of the
Send/Print
key is controlled by the function key setup (Section 4).
DISPLAY TEST
Starts a display test to observe all display characters.
Sequences through
all Fonts and test
screens. 2 seconds
per screen.
To return to the
TT
startup screen
To return to the
TT
weight display
To hold current screen
TT
ESC
!
SETUP
ESC
!
SETUP
DISPLAY
EXIT
DISPLAY
EXIT
POWER
TARE
TT
T
