Ishida OMNi-4000 Error Codes and Troubleshooting
15.6 ERROR CODE (0700 - )
No.
Message
Symptom or Phenomenon
Response or Check
0718 "FILE TRANSFER OF THE PRINTER
#1 WENT WRONG"
File transfer from the console to the printer failed.
Error occurs during printing from printers #3 and
#4.
[Sub-error]
0000
：
No CF card on the printer side.
0001
：
File failed to open.
0002
：
File failed to close.
0003
：
File read failure.
0004
：
File write failure.
0005
：
No file.
Respond according to the sub-error.
0719 "LABEL ADSORPTION TIMING
UNDETECTABLE"
Occurs in printers #1 and #2.
The console turns ON the label issue timing signal
the moment the applicator starts absorption. This
timing signal could not be detected.
This error does not normally occur.
0720 "THE BATTERY OF THE PRINTER #1
IS UNUSUAL"
P-910 battery switch is OFF or exhausted. Cannot
access the battery other
than test mode or system mode.
(OMNi-4000 is no err)
Turn ON the battery switch. Battery charge, P-910*-2 may be faulty.
0721 "IMAGE DEPLOYMENT ERROR"
4M exceeded when attempting to exchange the
image file internal data.
Delete unnecessary images.
Printer Errors
. Error screens differ depending on operation mode. Even for the same error, the error screen changes depending on the situation.
(1) Wrapping/pricing modes, pricing mode
(2) Label issue with wrapper front cover opened
(3) OMNi-4000
Rev. Feb 2015
31/
40
Yellow highlights indicate updates
