Rice Lake IQ plus 2100, Installation Manual

Page: 31 / 43

26 IQ plus 2100 Installation Manual
3.2.6 Default Menu
The DEFLT menu is used to reset indicator configuration to the default values. There are no parameters associated
with the DEFLT menu. From the DEFLT menu, press
ENTER
(
ZERO
) to move down to the RESET parameter. Press
ENTER
again to reset the indicator to the default configuration values or press
RIGHT
(
UNITS
) to cancel the indicator
reset and return to the menu level above.
NOTE:
All load cell calibration settings are lost when the RESET function
is performed.
Figure 3-11. Default Menu
3.2.7 Version Menu
The VERS menu is used to check the software version installed in the indicator. There are no parameters associated
with the VERS menu: when selected, the indicator displays the installed software version number.
Figure 3-12. Version Menu
XXXXXXX XXXXXXX
VERS DEFLT DIG IN
SERIAL CALIBR CONFIG FORMAT
RESET
XXXXXXX XXXXXXX VERS DEFLT DIG IN
SERIAL CALIBR CONFIG FORMAT
Software
version