Introduction
5
1.3
Keyboard and Display
Figure 1-2 shows the DC-100 console with annunciators, function keys and the numeric keypad. Annunciators
are described in Section 1.3.1. Section 1.3.2 describes the DC-100 function keys and keypad.
Figure 1-2. DC-100 Display
1.3.1
Annunciators
Table 1-4 shows a list of the annunciators that the DC-100 uses to provide additional information about the value
being displayed. The annunciators are illuminated when the specific function is being performed.
1.3.2
Key Functions
Table 1-5 lists the keys and key functions of the DC-100 keyboard and keypad (see Figure 1-2 above).
Note:
Some keys have different functions depending on what mode you are in, so be sure to check which mode is selected
before using them.
Annunciator
Annunciator Meaning
→
0
←
Gross weight is zero
NET
Display shows net weight (when tare weight is entered or recalled)
RECOM
Unit weight is recomputing is possible
INSUFF
Net weight is below specified percentage of scale capacity
²
Memory indicator showing quantity accumulation is being done
IN
Inventory IN (for counting mode)
OUT
Inventory OUT (for counting mode)
R
Scale is in Registration Mode, also referred to as Operation Mode. (see Section 1.2 for description of modes)
S
Scale is in Programming Mode. (see Section 1.2 for description of modes)
X
Scale is in Report Mode. (see Section 1.2 for description of modes)
Z
Scale is in Service Mode. (see Section 1.2 for description of modes)
Table 1-4. DC-100 Annunciators and Function
All manuals and user guides at all-guides.com
