14
RL-650 Series Neonatal Scale
8. To verify the installation, view the driver by looking at the device manager of the system.
Figure 5-5. Device Manager
9. To configure a printer using the USB driver, open the software driver
Parpar
in the device manager
(
Figure 5-5
). The port assigned to that driver is displayed.
10. Ensure the USB cable is properly connected and the unit is on.
11. Open and connect a terminal emulation program, such as Hyperterminal, via the USB driver. Select the
port assigned to the software driver
Parpar
to establish a port. The terminal emulation program is necessary
to view information transmitted from the indicator to the PC.
12. Press
.
The following example tickets print.
Figure 5-6. Example Tickets
A single print ticket has four spaces after the “patient weight” and only one space between weight and lb
in the examples shown above. Then seven <CR><LF> after.
Figure 5-7. IT Example Ticket
Figure 5-7
is for IT information only. The tickets print as in
Figure 5-6
.
Note
Important
Summary of Contents for 650-10-1
Page 1: ...RL 650 Neonatal Scale 650 10 1 Technical Manual PN 172982 Rev C...
Page 2: ......
Page 22: ...18 RL 650 Series Neonatal Scale...
Page 23: ......
