Rice Lake 650-10-1, Technical Manual

Page: 11 / 24

Assembly 7
2.2.3 AC Power Supply – Optional
An optional 120 VAC or 230 VAC adapter is available from Rice Lake Weighing Systems. To operate the unit
using the AC adapter, plug the cable into the back of the scale and the AC adapter plug into a power source.
Figure 2-2. AC Power Connection
Utilizing an adapter not supplied by Rice Lake voids all warranties.
2.2.4 Scale Setup
1. Ensure the scale is placed on a sturdy, flat surface.
2. Remove the transport support tabs from each corner of the scale base.
Figure 2-3. Support Tab Corners
3. The scale is equipped with four level adjusting feet. Rotate the adjustable feet located under the scale base
to level the scale.
4. Place weighing tray on the base assembly ensuring it is securely resting on the four corner posts.
Figure 2-4. Attach Weighing Tray
AC Power Supply Adapter
AC Power
Connection Switching Power
Informational Label
Important
Transport Tab
Corner Post
Weighing Tray