Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved
7
1.8.5 Head Count
The head count limits are 1 to 99. If the value entered contains a decimal point, only the numbers to the left of the decimal point
will be used. In the weigh mode,
1. Wait for
annunciator to display.
2. Enter the head count on the numeric keypad and press
.
3. Using the numeric key pad, enter the number of animals currently on the scale, then press
.
The head count will not be displayed when weighing, however, the results will be on the printed ticket.
If the display mode is not set to hold, immediately after the head count is entered, the group data is sent to the serial port.
If the display mode is set to hold, -
SPL
-
is displayed as the scale is sampled for the set sampling time duration (
SPTIME
). When
the sample time is complete, the average weight of the samples collected is displayed and the current weight units annunciator
flashes indicating the display is being held. Press
to send the group data to the serial port.
1.8.6 Load Total
The load total is the accumulated data of all groups in the load. When weighing groups, the group number on the printed ticket
increments with each group. Pressing
when done with all load groups gives a summary data for all the groups and
includes: total number of groups, total weight of all groups, total head count, shrink factor, if entered, total group weight with
shrink factor and the total group average weight per animal, see
for a sample print of group and load
totals. Pressing
resets the group number and a new load can be started.
There is no reprint ability for the Load Total data.
Note
Summary of Contents for 482-AG
Page 59: ......
