482-AG Livestock Digital Weight Indicator
8
Visit our website
2.0
Installation
2.1 Unpacking and Assembly
Immediately after unpacking, visually inspect the 482-AG to ensure all components are included and undamaged. The shipping
carton should contain the indicator and a parts kit. If parts were damaged in shipment, notify Rice Lake Weighing Systems and
the shipper immediately, see
2.2 Enclosure Disassembly
The indicator enclosure must be opened to connect the scale load cell cable and any other interface connections.
Before opening the unit, ensure the power cord is disconnected from the power outlet.
1. Ensure power to the indicator is disconnected.
2. Place the indicator face-down on an anti-static work mat.
3. Remove the screws that hold the backplate to the enclosure body.
4. Lift the backplate away from the enclosure and turn it over to access boards.
The display cable will still be attached. Be careful when lifting and turning over the backplate to prevent the
backplate from potential damaged.
2.3 Cable Connections
The 482-AG provides four cord grips for cabling into the indicator: one is for the power cord and three are to accommodate the
load cell cable and communications cables. Two of the three free cord grips come with a plug installed to prevent moisture from
entering the enclosure. Depending on the application, remove the plug from another cord grip that will be used and install
cables as required, see
for the recommended assignments for the 482 cord grips.
Figure 2-1. Recommended Cord Grip Assignments
When installing cords through cord grips, ensure the cord grip is tightened snuggly to prevent moisture from
entering the enclosure.
WARNING
IMPORTANT
Setup switch
access screw
Load cell cable
cord grip (open)
Communications access
cord grip (plugged)
Power cord
Back of indicator
IMPORTANT
Summary of Contents for 482-AG
Page 59: ......
