Animal Weighing Operation
© Rice Lake Weighing Systems
●
All Rights Reserved
39
Figure 5-1. Ticket Print Examples
5.2 Live Mode Operation
When live mode is enabled, the indicator always displays the current scale weight. Press
to send the data to the serial
5.3 Hold Mode Operation
When hold mode is enabled, the indicator samples the scale for the configured amount of time and then displays and holds the
average of the weight sampled.
The holding of a display value is signified by the blinking of the current units annunciator. The display hold is
released when the weight on the scale drops the hold delta percentage configured
(HDELTA
), the
Load Total
key is
pressed, the indicator is reset or the power is cycled.
5.3.1 Hold Settings
When using the hold mode, the following settings should be set prior to weighing,
.
• Set the
SPTIME
parameter
• Set the
HDELTA
parameter
• Set the
HDTHRSH
parameter
If default values of SPTIME and HDELTA are sufficient, these parameters do not need to be changed.
04:44:02 pm 01/27/2016
Group Number: 1
Head Count: 5
Weight: 2500 lb
Avg Weight: 500 lb
04:46:17 PM 01/27/2016
Group Number: 2
Head Count: 4
Weight: 5000 lb
Average Weight: 1250 lb
04:47:06 PM 01/27/2016
Group Number: 3
Head Count: 3
Weight: 7500 lb
Average Weight: 2500 lb
04:47:09 PM 01/27/2016
Total Group Nm: 3
Total Group Weight: 15000 lb
Toal Head Count: 12
Shrink Factor: 2.0
Total Grp Weight w/Shrink: 14700 lb
Total Group Average: 1225 lb
Group or Hold Mode Printout
Live Mode Printout
Gross: 4515 lb
04:30:19 PM 01/27/2016
Gross: 8510 lb
04:35:28 PM 01/27/2016
Note
Note
Summary of Contents for 482-AG
Page 59: ......
