420 Plus Installation Manual - EDP Commands
35
Command
Description
Values
PRI.DECPNT
Primary units decimal position
8.88888, 88.8888, 888.888, 8888.88, 88888.8, 888888, 888880
PRI.DSPDIV
Primary units display divisions
1D, 2D, 5D
PRI.UNITS
Primary units
LB, KG, OZ, TN, T, G, NONE
SEC.DECPNT
Secondary units decimal position
8.88888, 88.8888, 888.888, 8888.88, 88888.8, 888888, 888880
SEC.DSPDIV
Secondary units display divisions
1D, 2D, 5D
SEC.UNITS
Secondary units
LB, KG, OZ, TN, T, G, NONE
SEC.MULT
Secondary units multiplier
0.00000–9999.99
DSPRATE
Display rate
250MS, 500MS, 750MS, 1SEC, 1.5SEC, 2SEC, 2.5SEC, 3SEC,
4SEC, 6SEC, 8SEC
Table 5-4. FORMAT EDP Commands
Command
Description
Values
WZERO
Zero calibration
—
WVAL
Test weight value
test_weight_value
WSPAN
Span calibration
—
REZERO
Rezero
—
LC.CD
Set deadload coefficient
value
LC.CW
Set span coefficient
value
Table 5-5. CALIBR EDP Commands
Command
Description
Values
EDP.BAUD
EDP port baud rate
300, 600, 1200, 2400, 4800, 9600, 19200, 38400
EDP.BITS
EDP port data bits/parity
8NONE, 7EVEN, 7ODD
EDP.TERMIN
EDP port termination character
CR/LF, CR
EDP.EOLDLY
EDP port end-of-line delay
0–255
(0.1-second intervals)
EDP.ECHO
EDP port echo
ON, OFF
PRN.BAUD
Printer port baud rate
300, 600, 1200, 2400, 4800, 9600, 19200, 38400
PRN.BITS
Printer port data bits/parity
8NONE, 7EVEN, 7ODD
PRN.TERMIN
Printer port termination character
CR/LF, CR
PRN.EOLDLY
Printer port end-of-line delay
0–255
(0.1-second intervals)
PRN.ECHO
Printer port echo
ON, OFF
STREAM
Streaming port
OFF, EDP, PRN
STRRTE
Stream rate
INDUST, LFT
PRNDEST
Print destination
EDP, PRN
PRNMSG
Print message
OFF, ON
Table 5-6. SERIAL EDP Commands
Command
Description
Values
PWRUPMD
Power up mode
GO, DELAY
Table 5-7. PROGRM EDP Commands
