Page 15
CAUTION: Unplug the vacuum cleaner before servicing.
1. Remove the nozzle cover as shown on page 10,
II. Maintenance, B. Removing Nozzle Cover
2. Remove the screw and strain relief washer holding the power cord in place. (Fig. A)
3. Disconnect the power cord leads. (Fig.B and C)
4. Rewire power cord. White wire is crimpled with white wire from motor. Black wire goes to circuit
breaker. For assistance, see wire diagram on page 28.
5. Loop power cord as shown (Fig. D) and reinstall screw and retaining washer.
6. Replace nozzle cover.
Fig. A
Fig. B
Fig. C
Fig. D
II. Maintenance
F. Replacing the Power Cord (RSL1, RSL1A, RSL1AC)
