Ribble IWOC ONE, Quick Start User Manual

Page: 4 / 16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This section refers to Ribble e-bikes equipped with the
top-tube mounted iWoc One control button. If your bike is
equipped with the handlebar-mounted iWoc Trio button,
please skip to that section of the guide.
1. CHANGE THE ASSISTANCE LEVEL
Push the button once and the LED will flash to indicate the
current assistance mode.
Press it again whilst it is flashing to increase the
assistance to the next level.
Repeat as necessary to cycle through to the desired
assistance level.
2. TURN THE LIGHTS ON/OFF
(e-bikes with integrated lights only)
Short press the button and while the LED is blinking, hold
down the button until it lights up YELLOW.
3. BLUETOOTH AND NOTIFICATIONS
With Bluetooth® activated on your mobile device, turn the
bike on and the system will automatically connect to your
phone. The LED’s will briefly flash BLUE to signal that a
connection has been established or a disconnection.
If you receive a notification (call etc) on your phone
while connected via Bluetooth®, the LED will briefly
flash LIGHT BLUE.
No assistance Level 01 Level 02 Level 03
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
......
......