Ribble IWOC ONE, Quick Start User Manual

Page: 7 / 16

OTHER NOTABLE COLOURS
In addition to those listed above,
the LED may also display the
following colours.
• Blue = Bluetooth connection established
• Light Blue = Notification received
• Slow Flash Pink = Demo Mode
• Solid Pink = Safe Mode (Contact Ribble for assistance)
• Rapid Pink Flash = Error (connect bike to app to identify the fault)
Plug the charger into a
household power socket and
then into the charging port
on the bike. The light on the
iWoc ONE control button will
turn on automatically. While
charging, the LED will change
colour to reflect what state of
charging it has reached.
CHARGING THE BIKE
< 25%
> 25%
< 50% > 50%
< 75%
> 75%
IWOC TRIO QUICK START USE GUIDE
This section refers to e-bikes equipped with the handlebar mounted iWoc Trio control button only.
Press button C (middle button) to turn the
bike on. Hold down the same button for a
couple of seconds to turn it off again.
2. TURN THE BIKE ON/OFF
Push button A (top button), and the LED will flash
to indicate the current assistance mode. Whilst it
is flashing , click the button again to select the next
level of assistance. Repeat the process using Button B
(bottom button) to decrease the assistance level to the
next one down until no assistance is provided.
3. CHANGING THE ASSISTANCE LEVEL
Your Ribble e-bike includes a handy walk mode function
which provides a little extra assistance should you need to
push the bike. To activate this, simply press and hold down
Button B until the LED flashes WHITE. The bike will then
advance at 5km/h if the button remains depressed.
1. WALK MODE