background image

17

17

G

B

T

ROUBLESHOOTING

PROBLEM

CHECK

All of the LEDs on the MASTER Wi-Fi are off

Ensure that 12 or 24 V ac/dc power is present to the power feed terminals of the 
MASTER Wi-Fi

During memorization of the safety devices the buzzer sounds for 3/5 second 

It has been tried to memorize a safety device with wrong microswitch. 
Verify that the dual-color led that flashes on MASTER Wi-Fi corresponds at the safety 
device microswitch to memorize.

During memorization of the safety devices the buzzer sounds 2 twice

A safety device is already in the memory

When giving a command the buzzer sounds 3 times

- No safety device has been memorized, memorize at least one, OR

 

The DIP corresponding to the safety devices memorized on the MASTER Wi-Fi card 
are OFF. Turn them to ON

When giving a command the buzzer sounds 4 times

Possible cable missing between the MASTER Wi-Fi and the door control card:
- Blinker to card connection wires detached, OR
- Strip to card connection wires detached, OR 
- Photocell to card connection wires detached, OR 
- Radio control for pedestrian gate opening not completely closed

The buzzer sounds 5 times when the strip connected to the photocell receiver is 
pressed

Contact configuration error with the strip connected to the photocell receiver

When giving a command the buzzer sounds 5 times

 

Resistance not connected in series with the N.C. contact of the strip connected to 
the photocell receiver, OR

- Wires detached on the strip with N.O. contact, OR
- Resistance not connected in series with the N.C. contact of the strip, OR
- Wires detached on the strip with N.O. contact connected to the photocell receiver

The buzzer emits a sound every 3 seconds and the blinker during the gate operation 
flashes 2 times in succession followed by a pause of 3 seconds for 1 minute and one 
of the dual-color leds is ignited red fixed

Replace the batteries of the photocell(s) or the strip(s) as they are low

The  gate  doesn’t  move,  the  buzzer  emits  an  alternating  sound  and  the  blinker 
flashes 2 times in succession followed by a pause of 3 seconds for 1 minute and one 
of the dual-color leds is ignited green-red alternated

Replace the batteries of the photocell(s) or the strip(s) as they are exhausted

LED DL2 is off and one of the dual-color LED EDGE emits a constant green light

- Wires detached on the strip with N.C. contact, OR

 

Ensure that there is resistance of 8,2kΩ in series with the N.O. contact of the strip 
connected to the photocell receiver

The buzzer does not sound when the batteries are removed from the strip

Ensure that the micro-switch on the MASTER Wi-Fi corresponding to the strip is in 
the ON position

The door does not open or close and one of the dual-color LEDs emits a constant 
green light

 

Photocell is not aligned or it is engaged. The batteries in the photocell transmitter 
are exhausted, OR 

 

Resistance of 8,2 kΩ is not connected in series with the N.C. contact or in parallel 
with the N.O. contact of the strip connected to the photocell transmitter, OR

 

Resistance of 8,2 kΩ is not connected in parallel with the N.O. contact of the strip 
connected to the photocell transmitter

The door does not open or close, the buzzer emits an alternating sound and the 
blinker flashes 2 times in succession followed by a pause of 3 seconds for 1 minute 
and one of the dual-color LEDs alternates red and green

Photocell or strip receiver batteries are exhausted

The strip connected to the photocell transmitter or receiver does not work as a safety 
device

Check the correct setting of the jumper of the photocell transmitter/receiver. If the 
jumpers are correctly setting, remove and put again the batteries.

T

ECHNICAL SPECIFICATIONS

  
- POWER 

12/24 Vac/dc

- APPLICABLE TENSION ON CONTACT J4  120/220/230V 50/60Hz
- APPLICABLE TENSION ON CONTACT J2  12/24V ac/dc
- ABSORPTION AT REST 

40 mA

- MAXIMUM ABSORPTION 

100 mA

- WORKING TEMPERATURE 

-20°C ÷ +60°C

- SIZE 

96x43x20 mm 

 

(code ACG6094)

- WEIGHT 

0,042 kg 

 

(code ACG6094)

- SIZE 

125x55x28 mm 

 

(code ACG6099)

- WEIGHT 

0,090 kg 

 

(code ACG6099)

SAFETY DEVICES AND SIGNALING RADIO FREQUENCY SIGNAL  
TECHNICAL INFORMATION 

- FREQUENCY 

868,3 MHz

- SENSITIVITY 

-108 dBm

- EMITTING POWER 

<25 mW

- MODULATION TYPE 

FSK

- RANGE 

20 m in open spaces 

COMMAND ACTIVATION RADIO FREQUENCY SIGNAL TECHNICAL 
INFORMATION

- FREQUENCY 

433,92 MHz

- SENSITIVITY 

-107 dBm

- MODULATION TYPE 

OOK

- RANGE 

100 m in open spaces with antenna

Summary of Contents for MASTER Wi-Fi ACG6094

























Reviews: