12
12
G
B
12
12
J1
=>
CONNECTOR FOR CONNECTIONS TO THE CONTROL PANEL
AND SAFETY AND CONTROL INPUTS
Green wire => pedestrian control PED
Gray wire => contact common COM
Yellow wire => sensor EDGE
Black wire => photocell PHOT N.C.
White wire =>
terminal for connecting the wire coming from the
system control button N.O.
Brown wire => auto test power feed A-D+ TEST.
J2
=>
CONNECTOR FOR CONNECTIONS TO THE 12/24V ac/
dc CONTROL PANEL AT THE BLINKER OUTPUT (CHECK
POLARITY)
Red wire =>
positive (connects to the positive pole of the blinker
output)
Black wire =>
negative (connects to the negative pole of the
blinker output)
J4
=>
TERMINALS FOR CONNECTIONS TO THE 120/230V
CONTROL PANEL, AT THE BLINKER OUTPUT
J5
=>
FEMALE CONNECTOR FOR CONNECTION TO NOT CRX
RIB CONTROL PANELS (MASTER Wi-Fi code ACG6094)
OR TERMINAL BOARD FOR CONNECTIONS TO OTHER
BRANDS OR RIB CRX CONTROL PANELS (MASTER Wi-Fi
code ACG6099)
J8
=> TERMINAL FOR CONNECTION TO THE ANTENNA 868,3 MHz
JP1
=>
A/D+ TEST
see SELF-TEST-ENABLED RIB ELECTRONIC
BOARD CHART.
-
Jumper selection AUTOTEST mode for other brands control
panels with AUTOTEST negative power feed
+/~
Jumper selection AUTOTEST mode for RIB control panels
JP2
=>
Radio-control code removal for total and pedestrian opening
SW1
=>
Micro-switches for pairing and identifying strips and photocells
S1
=>
PROG. RX
Programming button
BUZZER
=>
Sound signal for installation, warning and alarm status
LED
DL1 (red)
- pedestrian opening control N.O. (PED)
DL2 (red)
- strip contact N.C. (EDGE)
DL3 (red)
- photocell contact N.C. (PHOTO)
DL4 (red)
- total opening command with push-button N.O. in the
system
DL5 (green)
- activated total opening radio-control.
DL6 (yellow)
- electrical power indicator 12-24V ac/dc
DL7 (dual-color) -
radio code learning for total, pedestrian and blinker
opening
DUAL-COLOR LED EDGE PHOT
off
=> operating normally
green
=> strip sensor or photocell engaged
red/green => alarm
LED EDGE PHOT 1 - EDGE SENSOR OR PHOTOCELL 1
LED EDGE PHOT 2 - EDGE SENSOR OR PHOTOCELL 2
LED EDGE PHOT 3 - EDGE SENSOR OR PHOTOCELL 3
LED EDGE PHOT 4 - EDGE SENSOR OR PHOTOCELL 4
LED EDGE PHOT 5 - EDGE SENSOR OR PHOTOCELL 5
LED EDGE PHOT 6 - EDGE SENSOR OR PHOTOCELL 6
SW1 MICRO-SWITCHES - DIP
DIP 1 ON => STRIP SENSOR OR PHOTOCELL 1 ACTIVATED
DIP 2 ON => STRIP SENSOR OR PHOTOCELL 2 ACTIVATED
DIP 3 ON => STRIP SENSOR OR PHOTOCELL 3 ACTIVATED
MASTER Wi-Fi code ACG6094
1
central antenna 433
2
ground-plane antenna
3-4 open
5
negative power feed 12/24V ac/dc
6
positive power feed 12/24V ac/dc
7-8
feed
9-10
total open/close control
MASTER Wi-Fi with terminal block code ACG6099
1
central antenna 433
2
ground-plane antenna
3
negative power feed 12/24V ac/dc
4
positive power feed 12/24V ac/dc
5-6
connects to the control panel at the total open/close
control input button (K BUTTON for RIB panels)
C
- LAYOUT
12/24V ac/dc
J1
JP1
SW1
J5
S1
JP2
J8
J4
J2
Dual-color Led
EDGE PHOT 1-6
BUZZER
6 5 4 3 2 1
+ -
10 9
6 5
2 1
+ -
6 5 4 3 2 1
+ -
10 9
6 5
2 1
+ -
Summary of Contents for MASTER Wi-Fi ACG6094
