background image

5. LIMITED WARRANTY

 

 

 

 

Amecor (Pty) Ltd products are carefully designed to provide reliable problem-free operation.  Product quality is 
carefully controlled during all manufacturing processes.  The Rhino Panic Pack is covered against defects in 
material or faulty workmanship for a period of 12 months from the date of purchase.  Due to our policy of 
continuous product improvement, Amecor (Pty) Ltd reserves the right to change specification without prior 
notice.
As the Rhino Panic Pack is not a complete intruder alarm system, but only part of it, Amecor (Pty) Ltd does not 
accept responsibility or liability for any damages whatsoever based on any claim that the unit failed to function 
correctly.

Limitations of Security Products: Security products and alarm systems do not offer guaranteed protection 
against burglary, fire, or other emergencies.  They may fail to warn for diverse reasons, including (but not 
limited to): power failure, dead batteries, improper installation, coverage “blind spots”, coverage areas 
overlsecooked during installation, defeat by technically sophisticated intruders, component failure, or 
inadequate maintenance.  Alarm systems should be checked weekly to ensure that all devices are working 
properly.  AN ALARM SYSTEM IS NOT A SUBSTITUTE FOR INSURANCE.

Amecor (Pty) Ltd, warrants its products to be in conformance with its own plans and specifications and to be 
free from defects in materials and workmanship under normal use and service for twelve months from the 
date of original purchase. Seller's obligation shall be limited to repairing or replacing, at its option, free of 
charge for materials or labour, any part which is proved not in compliance with Seller's specifications or proves 
defective in materials or workmanship under normal use and service. Seller shall have no obligation under this 
Limited Warranty or otherwise if the product is altered or improperly repaired or serviced by anyone other than 
Seller. For warranty service, return transportation prepaid, to the manufacturer.

There are no warranties, expressed or implied, of merchantability, or fitness for a particular purpose or 
otherwise, which extend beyond the description on the face hereof. In no case shall seller be liable to anyone 
for any consequential or incidental damages for breach of this or any other warranty, express or implied, or 
upon any other basis of liability whatsoever, even if the loss or damage is caused by its own negligence or fault.

Seller does not represent that the products it sells may not be compromised or circumvented; that the 
products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the 
products will in all cases provide adequate warning or protection. Customer understands that a properly 
installed and maintained alarm system may only reduce the risk of a burglary, robbery, or fire without warning, 
but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or 
property loss as a result.

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a 
claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly, for 
any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin, seller's 
maximum liability shall not in any case exceed the purchase price of the product, which shall be the complete 
and exclusive remedy against seller.

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No 
increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorised.

30

Summary of Contents for ADVANCED PANIC PACK

































Reviews: