RHINO 95HD, Operator'S Manual

Page: 27 / 42

F3788-7-04 Operation Section 4-4
MOUNTING AND DISMOUNTING BUCKETS
Mount buckets using pins (1 & 2), cap screws (3),
lock nuts (4) provided.
NOTE: Pin (1) with grease fitting is bucket/dipper pivot
pin.
PLACING THE STABILIZERS
Set the stabilizers to remove weight from the rear wheels.
Rear wheels are to remain touching the ground as this
provides for the widest stabilizer stance and lowest center
of gravity.
Raising the wheels off the ground will not only reduce
stability and digging depth, but impair performance and
impose unnecessary stress on the backhoe and tractor.
OPERATION
OPERATION
© 2004 Alamo Group Inc.
SEAT ADJUSTMENT
Adjust the seat up or down by removing
the 1/2 cap screw (7) and lock nut (15)
which secures seat bracket to seat post
and raising or lowering the seat. Adjust
seat forward or rearward by
repositioning seat latch (12) located
under mounting plate (2).