RHINO 95HD, Operator'S Manual

Page: 21 / 42

F3788-7-04 Assembly Section 3-2
ASSEMBLY
ASSEMBLY
INSTALLING PUMP KIT
WARNING: Do not modify or alter this
implement. Do not permit anyone to modify or
alter this Implement, any of its components or
any Implement function.
NOTE: Drawbar may need to be removed if it interferes with
reservoir. If drawbar can be left in place, retaining bracket (4)
should be installed on left side of pump as shown and
positioned on left side of tractor drawbar.
1. Fasten hydraulic pump retaining bracket (4) to pump (6)
using 3/8-16 x 1-1/4 cap screws (22) and 3/8 lock washers
(24). Fasten one end of chain (8) to pump retaining bracket
using wire rope clip (5), and 3/8 lock nuts (25).
NOTE: Wrap chain tightly around hitch bracket on tractor to
prevent pump from slipping off PTO shaft.
2. Sandwich reservoir (1) between 3-pt mounting brackets or
subframe and backhoe using hardware supplied with 3-pt
mounting brackets or subframe.
3. Install 1 x 2-1/2 nipple (19), 3/4 x 3/4 elbow (18) and 3/4 x 2
nipple (20) to right tank port. Point 3/4 x 3/4 elbow fitting
(18) up.
4. Install filter body (without filter element) to 3/4
nipple (20). Be sure oil flow (arrow on filter body) is
correct. Position body so element points right.
Install filter element (7).
5. Install 3/4 x 3/4 fitting (16) to filter body.
6. Install 1 x 1 elbow fitting (17) and hose barb (13) to
left tank port. Point hose barb up and 45° to left.
7. Install 1-5/16 live swivel elbow (14) to right “IN”
port on pump. Install 3/4 x 1-1/16 elbow fitting (15)
to left “OUT” port on pump.
8. Connect suction hose (3) to reservoir using hose
clamp (10) and to live swivel fitting (14) on pump.
9. Connect pressure hose (12) to “OUT” port on
pump and “IN” port on valve. Connect tank hose
(11) to “OUT” port on valve and to filter on
hydraulic reservoir.
10.Fill reservoir to within two inches from top with
10W or 20W hydraulic oil with SAE J183-M2C33F
classification. Dextron 2 ATF fluid and 10W engine
oil with API “SD” classification are also
acceptable.
NOTE: After cycling all cylinders, recheck oil level.
© 2004 Alamo Group Inc.
INSTALLING PUMP KIT (Option)