Rhima DVS, Operator'S Manual

Page: 23 / 44

Operative Instructions
23
Button Description
EXTRA program key (optional)
User customized special program.
MULTIWASHER program key
(optional)
This program is specific for a mul-
ti-purpose basket. It consists in
a basket with two rotating spray
arms to decontaminate gene-
ral items in hospitals, clinics and
such. The multiwasher basket is
suitable for any kind of accessory
or container that does not have to
be reprocessed in the sterilization
department.
Using the multiwasher basket is
very simple: the user just need to
remove the support from the inner
door of the washer and insert the
basket, laying it on the handles on
the walls of the washing chamber.
The water inlet of the basket will
fit inside the dedicated hole in the
washing chamber. The user now
will only have to press the specific
button program..
HDS program key (optional)
This key can be used in two diffe-
rent way:
If pressed lonely, the HDS program
starts: it consists of a special noz-
zle inside the washing chamber
that sprays pure detergent on the
human waste container (for 5 se-
conds), letting it react for a certain
amount of time (30 seconds), be-
fore a rinse phase. This spraying/
rinsing phase is repeated for a
defined amount of times (5 de-
fault). It is also possible to custom
all these parameters (time of the
spraying, time of the reaction,
number of repetitions) as desired.
If pressed before selecting a pro-
gram, a solvent liquid is sprayed
on the human waste containers, to
eliminate zinc emulsion residuals,
letting it react for a certain amount
of time (30 seconds), before start
the selected program.
8.1 Display
The LCD display makes it easier to use the appliance,
giving a great deal of information regarding the state of
the components inside the machine and showing the
status of the running program. The temperatures are
set in degrees Celsius or Fahrenheit. The images are
animated, to show how the current operation evolves.
The display also shows all the warning and alarm
messages necessary to correctly use the device plus
descriptions of how to solve the alarms.
Fig. 11
Description of the display (Fig. 11):
1) The number of the running program is displayed
(e.g. P1 = Short program);
2) It displays the name of the program and the phase
that the machine is running;
3) Several images showing the current status of the
machine are displayed;
4) It displays the temperature measured by the first
PT1000 probe placed in the chamber;
5) It displays the temperature measured by the
second PT1000 probe placed in the chamber. The
temperature detectable by the two probes must not
differ from each other by more than 2°C (36°F);
6) It displays the temperature measured by the
third PT1000 probe placed in the chamber. This
Disinfection Validation System (D.V.S.) is optional
and ensures that the temperature inside the
chamber is correct if one of the two main probes
fails.
7) Bar indicating the progress of the program; if the
program is ending, the bar will be almost entirely
green;
8) The A
0
value is displayed during disinfection;
8.1.1 Display screens
After starting the machine, following the instructions in
chapter "Starting the Machine", the display will show