background image

User Manual 
Issue No: 14 | 2015

17

 

Suggested Maintenance Procedures

 1.  Before using your RGK Wheelchair, make sure all 

nuts and bolts are tight. Check all parts for damage 

or wear and replace. Check all parts for proper 

adjustment.  

 2.  Keep quick / quad-release axles free of dirt to 

ensure positive locking and proper operation. Refer 

to adjusting the quick-release axle or adjusting the 

quad-release axle in Procedure 3 of this manual.  

 3.  Clean and polish Quick-Release Axles once a 

month – DO NOT OIL. 

 WARNING

Do not use the wheelchair unless it has the proper 

tyre pressure (P.S.I). DO NOT over inflate the tyres. 

Failure to follow these suggestions may cause the 

tyre to explode and cause bodily harm.  

 4.  Recommended tyre pressure is listed on the side 

wall of the tyre.  

 5.  The wheels and tyres should be checked 

periodically for cracks and wear, and should be 

replaced when necessary at your authorised 

dealer.  

 6.  Regularly check for loose spokes in the rear wheels. 

If loose, have them adjusted at your authorised 

dealer.

  
 7.  Periodically check handrims to ensure they are 

secured to the rear wheels. Refer to handrim 

replacement in procedure 5 of this manual. 

 8.  Periodically adjust wheel locks in correlation to tyre 

wear. Refer to adjusting wheel locks in procedure 8 

of this manual. 

 9.  Periodically check castor wheel bearings to make 

sure they are clean and free from moisture. Refer to 

replacing your front castor wheels in procedure 7 

of this manual. 

10.  Check upholstery for sagging, rips or tears. Adjust 

or replace as necessary

11.   The seat upholstery is secured by means of Velcro 

straps around the frame. The upholstery can easily 

be removed from the frame by loosening the 

straps under the seat. Refer to placing your seat 

upholstery see procedure 2 of this manual.

12.  The backrest upholstery is removed by loosening 

the cover, detaching the centre pad and wings, 

Refer to adjusting / replacing your upholstery see 

procedure 1.

13.   Wipe down the seat and backrest upholstery with 

a clean damp cloth.  It is important to keep the 

wheelchair clean, both for your own comfort and 

longevity of the chair. Clean the frame with a non-

abrasive cleaning agent.

 WARNING

Do not reuse single use fasteners. Contact your 

authorised dealer for more information. 

User Manual | Troubleshooting Guide Mechanical

 NOTE

Maintenance

It is recommended to clean and disinfect the frame 

and upholstery frequently.
Store wheelchair in a cool, dry place out of direct 

sunlight and in original packaging. 

Summary of Contents for TIGA FX



































Reviews: