background image

User Manual 
Issue No: 14 | 2015

32

Technical Data

 

From  

Max

Overall Width  

250 cm 

460 cm

Overall Seat Height  

300 cm 

600 cm

Overall Frame Length 

400 cm 

800 cm

Weight in Kg  

8Kg 

-

Torque 

Backrest Pivot Plate 

10

Wheel Lock  

10

Camber Bar 

10

Footrest Adjustment Height 

10

All other items  

10

User Manual | Technical Data

 Recycling/Disposal

Prior to the wheelchair being re-used, it must be 

carefully prepared.  All surfaces which come into 

contact with the user must be cleaned down and 

treated with a disinfection spray. 

In the following section, there is a description of the 

materials used on our wheelchairs.

 Aluminum: 

Castor forks, Wheels, side guards, 

Armrest, Footrest, Hand Rims, Anti-Tippers, Frame, 

Footplate covers

 Steel: 

Fixing points, Quick release axle pins, Footrest, 

Anti-tippers, Frame Wheels, Fixings, Wheel Locks, 

Footplate covers

 Titanium: 

Castor Forks, Quick release axle, Fixings, 

Side guards Anti-Tippers, Frame, Footrest

 Plastic: 

Handles, Tube stoppers, Castors, Footplate 

covers, Arm pads 

 Packing: 

Plastic bags made from  polyethylene, 

cardboard

 Upholstery: 

Woven polyester Cotton Leather

 

Disposal or recycling should be carried 

out by a disposal company or at a public 

disposal point. You could also return your 

wheelchair to your dealer for disposal 

(There may be a charge imposed).

 

Please note 

RGK Wheelchairs Ltd are bespoke and 
individually made for you, therefore your 
wheelchair may fall below or over the above 
mentioned sizes

User Weight 

125Kg

N

M

Summary of Contents for TIGA FX



































Reviews: