User Manual
Issue No: 14 | 2015
18
Procedure 1
This Procedure includes the following:
Adjusting / Replacing the Back Upholstery
The backrest upholstery is individually adjustable by
adjusting either the Velcro straps or Velcro securing
wings located under the centre pad.
Adjusting / replacing the back upholstery
To remove back upholstery, remove cushion, release
backrest tail from seat sling, release side securing straps
and lift upholstery squarely off.
To re-fit reverse above procedure. See Fig 15.
WARNING
The position of the footrest, camber tube and rear
seat height, as well as the tautness of the back
upholstery are directly related to the chairs stability.
Any change to one or any combination of the four
may cause the chair to decrease in stability. Use
EXTREME caution when using a new seating position
for the first time.
To adjust tension, pull centre pad up from the rear (side
with RGK logo) Re-position side wings to increase/
decrease tension and securely re-fit centre pad. See Fig
16.
With strap adjustable backrest upholstery use straps to
decrease/increase tension (not illustrated).
User Manual | Procedure 1
Fig 15
R/H Side Wing
L/H Side Wing
Centre Pad
Seat Sling
Fig 15
Side Securing Straps
Backrest Tail
Fig 16
CAUTION
Velcro used on upholstery may cause property
damage if contacted closely.