User Manual
Issue No: 14 | 2015
29
Procedure 12
This Procedure includes the following:
Adjusting the Anti-Tipper.
User Manual | Procedure 12
Adjusting the Anti-tipper
1. Press in the release buttons that secures the anti-
tipper wheel to the anti-tipper bar.
2. Adjust the height of the anti-tipper wheels to
between 25mm and 50mm of the ground.
3. Repeat steps 1 – 2 for the opposite anti-tipper.
WARNING
RGK strongly recommends ordering the anti-tips
as an additional safeguard for the wheelchair user.
Fig 34
Fig 35
NOTE:
Anti-tippers MUST be fully engaged. Ensure the
release button of the anti-tipper fully protrudes out
of the hole in the anti-tipper socket.
Ensure both anti-tippers are adjusted to the
same height.
NOTE:
Only rotate anti-tipper 180˚. Do not rotate 360˚