Chapter 3: Using Your Product
VSP 5360 User Manual
44
3.19 Recall Saved Settings
VSP 5360 provides 12 positions for saving or recording parameters. To recall saved settings:
1. Push the [Load] button, the button light is on, and enable the LOAD function.
Some of the number buttons 0~12 in PRE area are on and some flash. The buttons on is ready
for recall, and flashes means just recall. OLED shows as follows:
2.
Push the button on to load, for example, button 1, OLED shows as follows:
PUSH THE LEDS ARE ON TO RECALLLED
Button on is ready for recall
Button flashes means just recall
RECALL USER CONFIG MODE 1
RECALL IS SUCCESSFUL
PROGRAM INPUT:CV2
